You want to make your Mac iBook faster and you don’t know the steps that you have to take in consideration? Read this article and follow the written instructions. First of all, you have to know about the iBooks that they were manufactured by the Apple multinational Company who also creates other top products such as the iPods, iPhones and iPads.
The common feature is that all of them contain the Mac OS X operating system which makes possible to enjoy on your devices the new appeared programs and applications. The Mac iBook it is considered less powerful than the Powerbooks which were also created by the Apple Company. These gadgets are available in two versions including a G3 and a G4 model.
Their RAM size ranges between 32MB and 256 MB which is available for the G4 models. In case that you want to increase the memory size or you just simply want to make your gadget faster, my advice for you is to upgrade your iBook’s RAM. In case that you find the written instructions hard and you don’t find yourself capable for troubleshooting the problem, it is important to know that you have the possibility to return it to Apple manufacturers who have the obligation to help you especially in case that your device it is still under warranty. For this process you have to prepare a coin or a flathead screwdriver and a Philips screwdriver. In order to upgrade the RAM, the step number one is to buy online or from the Apple Store a 1 GB stick of DDR 2700 SO DIMM RAM. This is the most important accessory and you have to pay for that around 41$. The step number two is to turn off your Mac iBook and take out from the electrical outlet the power cable. Then you have to remove the battery. It is very important to make sure that your device it is not under current because you might be shocked. This is a very important step especially for the beginners who don’t know that the power can cause problems.
After you analyzed the situation you have to open the battery with the coin or with the flathead screwdriver and after you have turned the slot in order to unlock it you have to remove the battery. Then you have to remove the keyboard. For this process you have to press and hold down the F1 and the F12 buttons. Then you have to lift it up towards yourself. The next step that you have to take in consideration is to loosen the screws with the Philips screwdriver and after you have removed the old RAM you have to put the new one into the empty slot. It is very important to don’t push it hard and you can release it when you hear a click because that shows the RAM’s proper location. After this process you can reconnect the power cable and you can also turn on your device. Finally, don’t forget to repair the disk permission by opening the “Applications” and the “Utilities” folders from where you have to choose the “Disk Utility” and the “Verify Disk Permissions” buttons. For more information about this gadget, visit Apple’s website.