In this article you will find the answer to the “How to set up iMac wireless network using a Linksys router?” question. First of all, you have to know that the iMac is one of the Mac computer’s family members.
You have the opportunity to connect your iMac to a Wi-Fi connection which gives you the possibility to use the Internet everywhere in your house. If you are connected to the Internet through wireless, you can allow everybody in the house to use the system. This process is considered relatively easy and takes just a few minutes.
In order to set up and connect to your iMac the Linksys router, you will need an operating system that is compatible with the device. With the Mac computers you will not have problems, because they are built on the world’s most advancing operating system, on the popular Mac OS X. You can also connect your iMac computer to a wireless printer. The first step is to connect the new purchased Linksys router to an electrical state. You will know if you have inserted the power cable correctly because a green LED light will signalize it. For the step number two you will need an Ethernet cable, because you have to make the connection between the router and the iMac computer. Insert the cable’s one end into the router and the other end into the computer’s drive.The step number three is to restart the computer. Open the web browser and type into the box which is situated at the screen’s bottom the following numbers: “192.168.1.1” and press the “Enter” button. The step number three is to enter in the username’ s box the “admin” word without quotes and the same password. You can change these settings later. It is advisable to set a password for the wireless router. Otherwise other people can connect to your Internet which makes the network slower. Usually, for the Linksys routers the “admin” word is the default log in. You have the opportunity to create a network name. Be attentive and protect your password. Choose a code which contains different letters, number and symbols and make hard to guess. Don’t forget that your neighbors know you and they can guess easily the password.
The step number four is to open the Linksys router’s homepage. For this, enter into the web browser the 192.168.1.1. Scroll down until you will find the “Wireless” message and click on it. Then select the “Wireless Security” tab. You have to choose the “Security Mode”. Soon appears a window where you have to type the password. Finally, click on the “Save settings” button. Starting with this moment, if somebody wants to be connected to the wireless router, he will need to know the password. Follow the instructions and you will find the answer to the “How to set up iMac wireless network using a Linksys router?” question.